en
Canada CAD
Skip to product information
HAP-40

Powder steel at 68 HRC: holds its edge 3 to 5 times longer.

Bunka

All-purpose with a fine tip: precise and agile, flatter profile than a santoku.

190 mm

Standard: go-to length for everyday cooking.

Yoshida Hamono is located in Saga Prefecture, a very rural area on the island of Kyushu. Like many rural blacksmiths, they specialize in making agricultural tools such as sickles and hoes, but they are nationally renowned for their incredible kitchen knives. The first generation of the Yoshida family was, like many others, blacksmiths. After World War II, they decided to open a small workshop to produce knives and other steel tools, and in 1971, they expanded to large-scale production to meet growing demand from all over Japan. They invested early on in modern machinery that made large-scale production possible, which is one of the reasons they are able to coat their own steel, rather than purchasing it pre-rolled. Because Saga is not a major knife production center and there aren't many other craftsmen, they built a facility capable of handling the entire knife-making process from start to finish, whereas most knife makers outsource their steel rolling and sharpening.
When HAP 40 first became available, Osamu Yoshida quickly purchased the steel and tried it out. He was amazed at how incredibly sharp the steel could become and how long it would hold its edge, so he began making kitchen knives using this super steel. Although it is a difficult steel to handle, he feels a greater sense of accomplishment when forging with it than with other steels.
In addition to laminating their own steel, they also sub-zero heat treat their knives to purify the steel, allowing the knife to perform and sharpen better. This is done after tempering, by treating the knives with liquid nitrogen to remove excess retained impurities that haven't been converted to martensite. This prevents the knife from bending over time by "stabilizing" its structure. While this is scientific mumbo jumbo to most, it's a big deal in the knifemaking world.

The secret of this knife lies in its hard core made of a somewhat exotic Hitachi HAP-40 steel, which falls into the category of modern and technologically advanced steels. HAP-40 is thin enough to sharpen very well, and knives made from it retain their edge 3 to 5 times longer than traditional knives. An interesting fact is that, since it is a powdered steel, it has a very low chromium content (about 4%) and can react like a high-carbon steel under specific circumstances.
This steel is heat-treated to an incredible 68 HRC, but can still be sharpened relatively easily on whetstones. It is extremely durable and therefore less likely to chip along the edge than the steel used in traditional knives.

By Yoshida

Yoshida Hamono HAP 40 Bunka 190mm Kurouchi Maple Burl (Green)

Longueur Icon

Size

190mm

Longueur Icon

Overall length

333mm

Longueur Icon

Blade height

51mm

Longueur Icon

Handle to tip length

205mm

Longueur Icon

Thickness

2.0mm

Longueur Icon

Edge length

189mm

Longueur Icon

Weight

190 g

Longueur Icon

Handle length

128mm

Longueur Icon

Steel

Hitachi HAP 40, Soft Stainless Steel Coating

Longueur Icon

Steel Type

Powder steel

Longueur Icon

Profile

Osamu Yoshida

Longueur Icon

Usage

All purpose knife

Longueur Icon

Hand Orientation

Ambidextrous

Longueur Icon

Saya

Not Included

Longueur Icon

Production

Kyushu, Saga/Japan

Regular price $570.00
Sold out
Shipping scheduled for
FREE Shipping CA 150$+
Store availability
Montréal: Out of stock
Québec: Out of stock

*Transfer available between stores, contact us at

Care bundle

Description
HAP-40

Powder steel at 68 HRC: holds its edge 3 to 5 times longer.

Bunka

All-purpose with a fine tip: precise and agile, flatter profile than a santoku.

190 mm

Standard: go-to length for everyday cooking.

Yoshida Hamono is located in Saga Prefecture, a very rural area on the island of Kyushu. Like many rural blacksmiths, they specialize in making agricultural tools such as sickles and hoes, but they are nationally renowned for their incredible kitchen knives. The first generation of the Yoshida family was, like many others, blacksmiths. After World War II, they decided to open a small workshop to produce knives and other steel tools, and in 1971, they expanded to large-scale production to meet growing demand from all over Japan. They invested early on in modern machinery that made large-scale production possible, which is one of the reasons they are able to coat their own steel, rather than purchasing it pre-rolled. Because Saga is not a major knife production center and there aren't many other craftsmen, they built a facility capable of handling the entire knife-making process from start to finish, whereas most knife makers outsource their steel rolling and sharpening.
When HAP 40 first became available, Osamu Yoshida quickly purchased the steel and tried it out. He was amazed at how incredibly sharp the steel could become and how long it would hold its edge, so he began making kitchen knives using this super steel. Although it is a difficult steel to handle, he feels a greater sense of accomplishment when forging with it than with other steels.
In addition to laminating their own steel, they also sub-zero heat treat their knives to purify the steel, allowing the knife to perform and sharpen better. This is done after tempering, by treating the knives with liquid nitrogen to remove excess retained impurities that haven't been converted to martensite. This prevents the knife from bending over time by "stabilizing" its structure. While this is scientific mumbo jumbo to most, it's a big deal in the knifemaking world.

The secret of this knife lies in its hard core made of a somewhat exotic Hitachi HAP-40 steel, which falls into the category of modern and technologically advanced steels. HAP-40 is thin enough to sharpen very well, and knives made from it retain their edge 3 to 5 times longer than traditional knives. An interesting fact is that, since it is a powdered steel, it has a very low chromium content (about 4%) and can react like a high-carbon steel under specific circumstances.
This steel is heat-treated to an incredible 68 HRC, but can still be sharpened relatively easily on whetstones. It is extremely durable and therefore less likely to chip along the edge than the steel used in traditional knives.

Care instructions

Have professionally sharpened on a water stone every year. Store in a dry place. Wash immediately after use and dry completely before storing. Do not soak. Not dishwasher safe.

Product Remarks

Please note that each handle is unique and may exhibit distinct variations, such as differences in the shades or colors of the buffalo horn, which is part of its authentic, handcrafted character.

Warranty

Each knife is covered by a lifetime guarantee against obvious manufacturing defects. For example, if the handle comes loose or cracks after a few weeks of proper use, or if the blade develops a crack along the edge or blade spine. These issues are rare, but they can occur. In such cases, we will offer you an exchange for the same product or a refund. As every case is different, it is at our discretion to assess whether our lifetime guarantee against obvious manufacturing defects applies.

After-Sales Service

Is your knife not cutting as well as you expected? Each knife comes with what we call its "original sharpening". We have over 200 different products in stock, often several of each. All our products are handcrafted in Japan before being shipped, and the "original sharpening" may vary. If you think your knife is not cutting to its full potential, do not hesitate to contact us and we will sort it out for you by sharpening the knife free of charge!

Oops, did an accident happen with your blade?

Did your knife fall on the floor, get damaged during a slip, or was it used to cut something too hard? We’ll take care of it and support both you and your knife by offering you an in-store sharpening and repair service!

Do not hesitate to contact us or stop by the store to get an estimate in just a few minutes!

Shipping and Returns

What are your shipping rates?

Canada: $15 (free for orders over $150)
United States: $20
Rest of the world: $50


What are the delivery times?

We do our best to process your order within 72 business hours (weekends excluded) in order to ship your package as quickly as possible. Delivery times vary depending on the carrier. If you need faster delivery, please contact us at 514-503-1185.


Is there a refund policy?

No refunds are accepted.
The only exception concerns defective items (although our team checks every order with the utmost care). If you receive an item that appears to be defective, please let us know as soon as possible after receipt. In the event of damage caused by the carrier, please keep all items and original packaging for a possible inspection by the carrier. Items returned to Stay Sharp are at the buyer's expense. Items must be properly packaged to prevent any damage and must be fully insured. Please also provide us with the tracking number so that we can track the status of the shipment. Funds will not be refunded until we have received the items and confirmed that their condition is satisfactory. The refunded amount will correspond to the amount paid, less shipping and handling fees, online sales fees and any other costs incurred.

Customer Reviews

ACCESSORIES RECOMMENDED BY OUR EXPERTS

INTRODUCTION TO THE BUNKA KNIFE

The art of precise and elegant cutting

Stay Sharp's best Bunka knife collection is a tribute to the tradition and ingenuity of Japanese craftsmanship. This type of Japanese knife stands out for its versatility, aesthetics, and ability to make clean cuts with remarkable efficiency. Originally designed as an all-purpose knife, the best Bunka knife is ideal for several culinary tasks: precisely chopping vegetables, slicing meat or fish. Its recognizable shape, with an angular tip called a "k-tip", makes it as practical as it is elegant. "K-tip" refers to Kiritsuke, a Japanese blade style with an angular and straight tip, inspired by knives used in the Kantō region.

MANUFACTURING QUALITY AND ARTISANAL DESIGN

Each premium Bunka knife in our collection is crafted from high-end Japanese steels—whether stainless or carbon—selected for their ability to maintain a long-lasting edge. The blade is carefully forged, often by hand, by artisans who carry on traditional Japanese cutlery techniques.



Stay Sharp’s partner blacksmiths often have decades of experience, ensuring not only the quality of the blades but also consistent performance.
The result is a knife that is both robust and razor-sharp, capable of withstanding heavy daily use. Its slightly rounded blade allows for efficient rocking motions, while its width makes it easy to retrieve sliced food.

FEATURES AND CONCLUSION

The best Bunka knife is immediately recognizable by its pronounced angular tip (K-tip). This distinctive geometry allows for precision cuts, particularly when trimming vegetables, removing membranes, or working near bones with control. Unlike rounded-blade knives designed for a rocking motion, the Bunka is ideal for fluid, controlled top-to-bottom cuts, whether pulling toward you or pushing away.
Its relatively short blade, often between 165 and 180 mm, combined with a good blade height, gives it excellent lateral stability, making it easier to guide the knife by resting the side of the blade on the joints. This compact size also makes it highly maneuverable, which is particularly useful in tight spaces or home kitchens.



Chefs trained in kaiseki or washoku cuisine often use a Bunka knife for intermediate tasks, taking advantage of its balance of finesse and durability.
Main features of the Bunka collection:

  • High-quality Japanese steel blades (stainless steel, carbon steel, or powder steel)
  • Angular tip (K-Tip) for precision cuts
  • Ergonomic handle for optimal comfort
  • Traditional design with a contemporary touch
  • Suitable for both professionals and passionate home cooks

Whether you are discovering Japanese knives or looking to diversify your kitchen arsenal, the best Bunka knife is a strategic choice. Its short, agile blade, combined with a highly pronounced tip, offers rare versatility for specific cuts and everyday tasks. It is an excellent alternative to the Santoku for those who prefer a knife that offers greater precision. It is equally suitable for professionals and passionate home cooks who want to improve efficiency without sacrificing control.
Add a Bunka knife to your collection today and transform your cooking routine into a fluid, precise, and rewarding experience.



Discover our collection of the best Bunka knives at Stay Sharp — where tradition meets modern culinary performance.

Drawer Title
Similar Products